Modeling and simulation of coupled nuclear heat energy deposition and transfer in the fuel assembly of the Ghana Research Reactor-1 (GHARR-1)

Abstract

Monte Carlo N-Particle (MCNP) code coupled with PLTEMP/ANL code were used to model and simulate the heat transfer problems in the fuel elements assembly of the Ghana Research Reactor-1 (GHARR-1) by solving Boltzmann transport approximation to the heat conduction equation. Coupled neutron radiation-thermal codes were used to determine the spatial variations of thermal energy in the fuel channels, the heat energy distribution in the radial and axial segments of the fuel assembly and the convective heat transfer processes in the entire core of the reactor. The thermal energy at maximum reactivity load of 4 mk, reactor power of 30 kW and inlet system pressure of 101.3 kPa were found to be 8.896 × 10-16 J for a single fuel pin, and 1.104 × 10 -15 J and 7.376 × 10-16 J, for the radial and axial sectioning of the core respectively. Using the PLTEMP/ANL V4.0 code and given that the inlet coolant temperature was 30 °C, the maximum outlet coolant temperature was 51 °C. The energy values were obtained using the following thermodynamic parameters as maximum pressure drop of 0.7 MPa and mass flow rate of 0.4 kg/s. Neutronics point kinetics model and Safety Analysis Report used to validate the results confirmed that the heat distribution in the core did not exceed 100 °C. The heat energy profiles based on the data suggested no nucleate boiling at the simulated energies, and since the melting point of U-Al alloy fuel material is 640 °C, the reactor was considered to be inherently safe during normal or steady state operations. © 2011 Elsevier B.V. All rights reserved.